Ditto here Bert. That would be like drilling another hole in a sinking ship to let the water out.

From what I know of what is happening, The Grim Reaper is holding this place together with silly string and a prayer so ixnay on the explosives for now buddy.

Fuck. Alright. We'll tie ourselves together with rope and branch out and try and pull in anyone we see wandering.

Give it just a little longer before you do something like that Bert. I am going to try to get Hannah and I down there.

When my people and I get to this room with the seal and the tomes, I wlll see what can be done.

Hmm I think he is in the building, I can't tell where thou.

I actually just accidentally stumbled into the seal room. It helps if you take a short cut through the Necropolis, but make sure to take that second right at the 50ft flesh golem.

If you referring to what happened in South America, I’ll talk to all of you outside when this is all over.

Hmm sounds like Hannah and I are some of the few still missing, I will see if we can fix that. Thou I am not to hot on the idea of going through the Necropolis, particularly with Hannah.

You got on the goggles and earbuds I left up here? Anyone?..... Damnit, this frequency doesnt work either, going back up for a new set of batteries, more recording media, and to upload my notes.

I had on the earbud...until it started screeching with static, then I tossed it at what looked to be Abraham Lincon's ghost.

Oh, I guess the frequency works. Anyway, I have finished extrapolating what the seal should look like when it is intact. Could use someone that knows how to use such things to help inscribe the repairs, and get this thing working again.

So, after we fix this thing, then what? I call in a construction company and they encase the thing with reinforced concrete?

I thought all the damage was inflicted from our side because they didn't have corporeal bodies.

Fine. At least let me build a bunker around the damn thing.

Hey! I can do subtle!


I just don't do it often.

Yup. I already have the designs worked out in my head. I just need to contact my archie.

I'll need some help making sure its as Everything Proof as possible though.

Yeah, I know.

I can reccomend sealing with a combination of silicon oxide with a very health quantity of lead oxide, both to be applied at high tempertatures, with a fine layer of ceramics between that section of floor and the layer above.

I would think that properly applied, six inches or so of lead impregnated ballistic glass would fit the bill just about right, especially if covered over by a nice hardwood floor.